The term ‘fall’ when we talk about gutters, is how much the gutter is made to drop, or slope, into outlet drainpipes. The accepted average is 20mm for every 5 metres of guttering, though if the pitch of your roof is steeper it may need to be more, as more water will be collected faster.
- Guttering Perth offers cost effective roofing solutions to all of Perth region
Uncategorized Archives - Guttering Perth | Gutter Repairs & Installation
January 5, 2021
- By: gutteringperth
- Comment: 0
January 5, 2021
- By: gutteringperth
- Comment: 0
What is the purpose of roof gutters?
If too much water falls onto, or is directed onto from spilling over roofs above, it can cause many problems. Not only can it was away landscaped slopes, but can also backflow under a home’s foundation slab and cause cracks to form in the external and internal walls.
January 5, 2021
- By: gutteringperth
- Comment: 0
What are Roofing Hammers or Hatchets?
Roofing hammers and hatchets were the main tools used by roofers when installing or repairing new roof materials. These days however most roofers prefer to use nail guns. Even though there are more safety issues with nail guns, they are much faster to use.
January 5, 2021
- By: gutteringperth
- Comment: 0
What is a gutterer called?
A gutterer is also known as a roofer, roof mechanic, or roofing contractor. These types of tradespeople specialise in working solely with roof guttering and roof construction. They can design and build, or repair, roofs on all types of buildings using many different types of materials – like tiles, sheet metal, shingles or even bitumen.
January 5, 2021
- By: gutteringperth
- Comment: 0
Is there a tool to clean gutters from the ground?
If ladders or scaffolding can’t be used, then a gutter vacuum is the main option for cleaning gutters from ground level. If the gutters are full or DRY matter – like leaves, feathers, pine needles etc, then it can be vacuumed out without using a ladder.
January 5, 2021
- By: gutteringperth
- Comment: 0
Why do my gutters go into the ground?
With correctly fitted gutters, there need to be correctly fitted downpipes. They will go down into the ground and then connect to either tank storage pipes or stormwater pipes out to the curb. They allow water to flow from your roof, down the gutters and then away from the house, preventing building erosion or landscaping
January 5, 2021
- By: gutteringperth
- Comment: 0
How do I stop my gutters from being blocked?
Here are 5 easy ways to stop your gutters getting clogged! 1 – Check and clean out your downpipes regularly – monthly is great! 2 – Make sure to trim tall hedges or low-lying tree branches away from the gutter edges, so leaves and bark don’t fall in. 3 – Put in leaf and debris
January 5, 2021
- By: gutteringperth
- Comment: 0
Is it normal for gutters to overflow in heavy rain?
If not enough downspouts and pipes are fitted to guttering lengths, even light rainfall can cause gutters to overflow. The larger surface area a roof has, the more downpipes need to be fitted.
January 5, 2021
- By: gutteringperth
- Comment: 0
What is the difference between gutter apron and drip edge?
A gutter apron is a long folded piece of metal or other material, usually 4 inches above the fold, and another 4 inches below. A drip edge is fitted underneath the very edge of the roof tiles or sheeting. The gutter apron goes just under the drip edge, and then just over the gutter –
January 5, 2021
- By: gutteringperth
- Comment: 0
Does the gutter go behind the drip edge?
A drip edge is put under the first row of tiles, or sheeting, to encourage water to flow off the roof edge, directly into the gutter just below. Without a drip edge leading to a gutter, water would just run down BEHIND your gutter, down the fascia board and siding. That has the potential to
- 1
- 2